Site icon



As we know that with the passage of time, the world is expected to face the scarcity of water. Owing to this fact, different processes have been introduced. Reverse osmosis is one of those processes which are very reliable ways to purify the water is aimed at providing the best reverse osmosis services. The company provides all the available information regarding reverse osmosis to customers who need to know about it. provides many services related to water treatment. provide many water treatment services indiscriminately. Whether you need water treatment services for your residential property or you want reverse osmosis to be done in a commercial area. will always provide the best technical and non-technical services

What Is Reassembling?

Reassembling is a technical process that is done as a part of reverse osmosis. People usually need assembling when they want the reverse osmosis to be effective. Here are the steps in which the perform the reassembling.

  • Before the assembling is done, the dismantling of the water pump is done. In the first step, the fan belt is removed. This fan belt generally connect the crankshaft pulley with the water pump.
  • The connection between the cooling fan and the pump pulley is also removed.
  • Similarly, the connection between the water pump and the engine is also terminated.
  • After removing all the connections, the water pump becomes completely exposed. Due to this, the assembly of the water pump can easily be taken out.

Once the assembly is taken out, the process of reassembling takes place.

  • The impeller nut and the pulley nut should be taken out from the assembly.
  • There is a shaft in the assembly that should also be removed. This shaft contains the oil seal and much more.
  • Clean all the components of the water pump that you have taken out from the assembly. For this purpose, you can use the kerosene oil.
  • It is better to replace the defected water pump with the new water pump.
  • All the parts that were removed earlier are reassembled in the water pump. The pulley that is reassembled should be rotated to confirm if it has the capability to rotate or not. The water pump will not be able to work properly if the pulley does not rotate after the reassembly.
  • The process of reassembly continuous when you place the water pump back into the engine. Also reassemble the fan and the fan belt that removed.
  • Reassemble the mounting brakes and radiations.
  • After performing all the reassembly, use the hose clip to connect the bottom hose with the top hose.

After having all the reassembly done, check if there is any leak in the pump. For this, put the cooling water in the cooling system and use the pressure tester to increase the pressure. This will tell you a lot about the existence of any leak in the cooling system of the engine

Exit mobile version